Products
WCT CDLF+CDH/High Pressure Pump for Waste Water Treatment
● The CDLF+CDH vertical high-pressure pump consists of two vertical multi-stage centrifugal pumps connected in series to form a dual-pump system to generate high pressure.
● The HP horizontal high-pressure pump is available in two forms: single unit and two units connected in series.
● The impellers are installed back-to-back to balance the huge axial force.
Product Description
Model Instruction

Product Parameter
| Technical Parameters | ●Flow range: 0.4m³/h~65m³/h | |||||||||||
| ●Lift range: 110m~718m | ||||||||||||
| ●Ambient temperature: -15℃~+120℃ | ||||||||||||
| motor | ●Fully enclosed, air-cooled two-pole standard motor | |||||||||||
| ●Protection level: IP55 | ||||||||||||
| ●Insulation grade: F | ||||||||||||
| ●Voltage: 50Hz:3x380V-415V | ||||||||||||
| 3×220-240/380-415V | ||||||||||||
| 3×200-220/346-380V | ||||||||||||
| 1×220-230/240V | ||||||||||||
| Operating conditions | ●A thin, clean, non-flammable and non-explosive liquid that does not contain solid particles or fibers | |||||||||||
| ●Liquid temperature: normal temperature type -15°C to +70°C | ||||||||||||
| Hot water type -15°C to +120°C | ||||||||||||
| ●Ambient temperature: higher +40°C | ||||||||||||
| ●The altitude is 1000m higher | ||||||||||||
| Link | ●Inlet and outlet connection: using card sleeve type quick installation connection | |||||||||||
| Features | ●High lift | |||||||||||
| ●Adopts standard electric motor | ||||||||||||
| ●Simple structure, good reliability, high efficiency and energy saving, light and beautiful appearance | ||||||||||||
| ●Adopts integral, easily detachable mechanical seal for easy maintenance | ||||||||||||
| application | ●Water treatment ultrafiltration system | |||||||||||
| Material | ●Reverse osmosis system | |||||||||||
| ●Supercharging system | ||||||||||||
| ●High pressure washing system | ||||||||||||
| ●Water supply | ||||||||||||
| ●Stainless steel | ||||||||||||
Product Features
Medium temperature: normal type:0℃~68℃ hot water type:0℃~120℃
1. Ambient temperature:+40℃,
2. Max ambient pressure:1.0MPa
3. Advisable to use motor of higher power in case that the density or viscosity of medium is above that of water
4. PH: 5 to 8
Reated Products
Related products
We'd Love To Hear From You
Ready to start your project?
Reach us through :
- Email: Celine@wxwatertech.com
- Phone/WhatsApp: +86 13961543024
- Building 29,Liandong U Valley,Xinjie Subdistrict,Yixing City,Jiangsu Province,China








